loading
reading
writing
saving
searching
Parasound HALO P6 2.1 Ch Preamplifier & DAC - $1,125 (PHOENIX)
QR Code Link to This Post
I am the original owner and have all the original shipping box and manual. Buy with confidence and give me a call with any questions.
SPECS From PARASOUND:
Your System, Dialed‑In
Drop the Halo P6 into your rack and everything snaps into focus. Voices feel present, bass blends cleanly with your sub, and streaming loses the edge that keeps you from turning it up. Vinyl clicks. Long sessions get easier, and every source just sounds more like music.
Designed as a true 2.1‑channel control center, the P6 adds the pieces most systems are missing: an ESS Sabre32 Reference DAC (ES9018K2M) with USB up to 384 kHz/32‑bit and native DSD64/128/256, coax/optical 192/24, fully analog bass management with independent high‑pass/low‑pass crossovers and front‑panel sub level, MM/MC/MI phono (100 Ω or 47 kΩ), balanced XLR input, balanced & RCA pre‑outs, plus XLR + dual RCA sub outs. It also uses a resistor‑ladder volume control for fine, low‑noise steps, includes a high‑current TI TPA6120 headphone amp, and offers Home Theater Bypass for seamless 2‑channel + surround integration.
Praised by audiophiles and reviewers alike:
“The P 6 is a wonderful listen.” — Positive Feedback.
“The Halo P 6 preamplifier can do it all when it comes to a preamp.” — Future Audiophile.
“…the P 6 is a no‑brainer for anyone shopping for a digitally enabled preamplifier close to its asking price.” — Home Theater Review.
Frequency Response
10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB
Total Harmonic Distortion (THD)
< 0.01 %
Interchannel Crosstalk
> 70 dB at 20 kHz
> 78 dB at 1 kHz
Preamplifier Stage Input Sensitivity
300 mV in for 1 V
Total Gain: 10 dB
Max Output: 7.5V
S/N Ratio - Line Inputs 1- 5
> 108 dB (shorted, IHF A-weighted)
> 88 dB (shorted, unweighted)
S/N Ratio - DAC Inputs
> 108 dB (IHF A-weighted)
> 88 dB (unweighted)
S/N Ratio - Phono Input
MM > 80 dB (shorted, IHF A-weighted)
MM > 70 dB (shorted, unweighted)
MC > 67 dB (shorted, IHF A-weighted)
MC > 55 dB (shorted, unweighted)
Phono Stage Sensitivity / Input Impedance
MM: 38 dB / 47 k Ω
MC: 52 dB / 47 k Ω or 100 Ω
Input Impedance
Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg
Preamplifier Output Impedance
Unbalanced: 100 Ω
Balanced: 470 Ω per leg
High & Low Pass Crossover Slope
12 dB per octave
Supported DAC Sampling Rates
USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz
Coax/Optical: up to 192 kHz / 24-bit PCM
Digital to Analog Converter
ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit
USB 2.0 Controller
Savitech SA9227, 384 kHz / 32-bit
Headphone Amplifier
Texas Instruments TPA6120A
Output Impedance 10 ohms
XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
Dimensions
Width: 17-1/4" (437 mm)
Depth: 15" (381 mm)
Depth, with cables 17" (432 mm)
Height, with feet: 4-1/8" (105 mm)
Height, without feet: 3-1/2" (89 mm), 2U
Net Weight
14 lb. (6.3 kg)
Shipping Weight
21 lb. (9.5 kg)
Power Requirement
Standby: 0.5 watts
Power On: 15 watts
100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.5 dB
ESS Sabre32 Reference DAC (ES9018K2M)
Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
Coax and optical inputs accept PCM up to 192kHz/24-bit
Analog bass management with high & low pass crossovers
Home theater bypass input for surround sound integration
Front panel subwoofer level control
Dedicated high current headphone amplifier (TI TPA6120)
Phono input for MM, MC and MI with 100 Ω or 47k Ω load
Front panel Aux input with automatic +12 dB gain stage
5 pairs RCA line level Analog inputs
1 pair XLR balanced Analog input
Balanced XLR and RCA left and right preamp outputs
1 balanced XLR and 2 RCA subwoofer outputs
Bass & treble controls with relay bypass from remote or front panel
Rear panel IR input and IR loop output jacks
12 Volt trigger output
Back-lit remote control with discrete buttons
0.5w standby power consumption meets Energy Star & EU specs