favorite this post Kar Kaddy Spare Tire (Phoenix) hide this posting unhide

In an attempt to catch the thief/thieves who stole my Kar Kaddy Tow Dolly, I'm offering the spare tire for $2000. It's a 175/80R13 Trailer Tire on a White Spoke Wheel. I've tried to get them to come back for the ramps and straps, which I was willing to sell to them for just $1000. Apparently they have their own, or maybe yours. Anyway, if it's any concern, description of Dolly as follows:

Kar Kaddy Dolly was stolen between the hours of 6PM 4/27/18 and 6AM 4/28/18 from in front of my house on S. Roberts Rd. just off Southern Ave. in Tempe. Faded Tan/Beige with Brown Fenders, mostly surface rust but some of the pin stripes on the fenders are still visible. Fenders are bent up pretty bad, the left one was hit by a truck and the back is bent in almost to the tire, tail lights are newer LED square ones, LED's in a circle don't match. Left one is Napa, Right one is O'reillys, Front Marker Lights on the fenders are Amber LED and still light up, wiring is spliced with black electrical tape which is also wrapped around the dolly in numerous placed holding the wiring tight from the tongue to the fenders. Tires are 13" Ironman Radials about 4 years old. Steering Link Pin is bent, has a flat spot on the head, and still goes in the alignment hole if lightly tapped, is threaded on the bottom half, but doesn't have a nut on it. No ramps, it's the kind the ramps slide into channels front to back on top between the cradles. The twisted and bent cotter pin and the hitch pin are secured with a thin braided wire loop. It has one dirty Kar Kaddy Logo mud flap on the right fender, none on the left. Lift Handle on the Tongue is closer to the tongue than most, a big hand might scrape nuckles on the tongue. The 4way plug has crappy aluminum wiring all the way to the tail lights and marker lights. The male prong is loose. Where the wiring branches off to the fenders from the tongue is wrapped with black electrical tape about 8 inches wide. Lots of surface rust. Ratchets slide loosely in the channels, ratchet handles are sun baked and have been dragged on the roadway, about 20% of the rubber is gone, no spring holes on the handles so I secured them with fabric bungee straps. Some of the springs on the rachet mechanisms are gone. Just the ones in front of the ratchets still attached. Ratchet Pawls don't have handles or spring holes. Safety chains on front of the cradles were fastened to each other across front of cradle, left one is missing the S hook, Right one has the original long hook. Front Safety chains are bolted together with a long bolt and nut about a foot or so from the hooks. Hooks dont match. The left one is long and has a double bend on the end. The right one is regular without the bend. The 4way plug harness is taped where it comes up out of the tongue. Tongue is straight without any bends, and it doesn't have brakes, just hubs. It's so light, it bounces a lot going down the road. I thought I saw it eastbound on Southern Ave around 6:30am about a week after it was stolen, pulled behind a big black pickup. Might have seen it 6.26.18 around 10am Central/Broadway, Phoenix westbound, but lost it around 7th Ave and couldn't make a positive ID. If you see it, call the Police(Tempe 18-50164) and send me a pic. This could be fun. Help get some dirt bag free meals, and Make America Safe Again. I was offering a reward of 1 cent, contingent on prosecution and sentencing to include 2 years of substance abuse counseling, upon release, but didn't have much response. Might increase that to 2 cents. Thanks for looking.
  • do NOT contact me with unsolicited services or offers

post id: 6841175930



best of [?]