Yes I still have them, Read add. Im selling SBC parts which are listed as follows.
One block 305 (5.0L)two bolt with caps, vatted with new cam bearing, brass freez plugs, for $100. (one piece seal) Has standard 3.740 bore, barely any ridge on top if any.
Two cranks. One 350 from 1969 El Camino stock size no ware polished and ready to use. Rods are 2.100 Mains are 2.450 just like ground and ready to use. $110.
I have one 305 crank 1 pc seal type needs grinding was and is 2.100 rods and 2.450 at the mains. Good after grinding, $40.
I have two sets of factory heads for 350 older 60's early 70's both use the same size valves at 1.500 exhaust and 1.725 intake. The black ones are the older ones with vales and rocker arms etc, for $60.
The orange ones have no valves, no rockers, bare and are for $40 the pair. Same size valves as the black ones are.
I have a set of factory roller lifters from a Vortec 350 newer style all complete with push rods and sheet metal holder plate. Measures 842 dia all for $50.
I have set of TRW pistons .030 over # 7009P with about .200 pop up or 12/1 compression pin size .927 all for $100. with pins.
I have two factory intake quadra jet manifolds, one polished and ported, the other stock, both at $35. ea.
I have two factory exhust manifolds both left hand side #8855168-LH6 and 3932468-LH18, both at $30. ea.
I have a factory Rochester 2 barrel carb, needs rebuilding #'s 355CA81 for $35.
I have a Borg Deck 10-1/2" pressure plate in good cond for $25.
I have a 18-1/4" flex fan left hand rotation brand new for $20.
I have 8 factory stock rods for the 69 El Camino 350 in good con for $40 the set.
I have one brand new Chrome alternator bracket for headers on the driver side for sbc at $15. No picture on the bracket
do NOT contact me with unsolicited services or offers